Hans and the Singer 206, Part 2

Here's Part 2 of Hans from Chicago's questions about his Singer 206.

Is there any type of regular maintenance a 206 requires (oiling?) to care for them?
Of course. Every vintage Singer requires regular oiling at a minimum (click here to learn how to oil your machine), and I always check the wiring and the motor for safety’s sake. You'll also want to check that the belt is properly adjusted.

This machine came with a needle, bobbin and bobbin case, so I believe it is operable. Are there other attachments that are needed/beneficial?
Needed or beneficial for what? Please understand it is impossible to answer vague questions like this.

I have read this machine uses an unusual needle (206x13) and using the wrong one will nick up the bobbin case.


That’s absolutely true, a 15x1 needle should not be used on this machine. The 206x13 needle is a bit more expensive than the more common 15x1 needles used by model 15s, 201s, 221s et cetera. For that reason, some people muck with the timing on the 206 (and related 306) to use the 15x1 needle, but based on what I’ve read from those more experienced than I, this is not a good idea and ought not be done.

For your edification on this topic, I recommend you join the Vintage Singers Yahoo Group and search through the archives to read up on it. I do not recommend you pose questions to the group on that topic until you have read through the archives, as it has already been discussed to death; many of the kind and knowledgeable folks on the forum have dedicated much of their time to explaining it, and I think it would be inconsiderate to ask them to repeat themselves.

Do you know of a good supplier for these needles?
There are tons of suppliers, but I haven’t ordered enough 206x13 needles to know which is better than another. I’m not the best person to answer this question, you’re better off poking around on forums that deal more heavily with actual sewing.


Is the 206 really "The Singer That Should Be Forgotten"?
Hans, like many people you're sending me a question seeking a factual answer to a matter that is rooted in opinion. You might as well ask me "Is France really a good place to live?"

The link you’ve provided is to the blog written by Ed L., a well-respected vintage sewing machine aficionado who founded the Vintage Singers group. I’ve never had the pleasure of corresponding with Ed, but I believe he would tell you the same thing I would: That a sewing machine becomes an intensely personal item to the user, and that there’s no accounting for taste. If you spend time around them you’ll find there’s a model you ought to hate that you simply love, and vice versa. Ed clearly states his reasons for why he dislikes the 206.

Another vintage sewing machine aficionado was the dearly departed Ray W., a longtime contributor to various sewing machine forums, and he has stated that the 206 was one of his favorite machines and his main machine for many years.

Whether or not the 206 should be forgotten by you is entirely up to you.

Reader Questions: Hans and the Singer 206, Part 1

Time to answer some reader questions. These photos here were sent to me by reader Hans in Chicago. As he writes,


In a thrift store, my wife bought this Singer model 206. Our six-year-old recently expressed interest in sewing and we were looking for a machine to get her started.

Hi Hans, I really like the 206 and own several. That being said, the 206 wouldn’t be my top choice to teach sewing to a child, for two reasons:

One, the zigzag adds a layer of complexity you could avoid with a straight-stitch model like the 15, 201, 99, 66 or 221.

Two, more significantly, the design of the 206 requires that the entire machine be tilted back on its cabinet-mounted hinges in order to access and change the bobbin. Some 206s are aluminum, rather than the heavier cast-iron, but even with an aluminum model, this process will likely not be easy for a six-year-old child. You’ll also have to ensure they don’t let the machine slam back down on their fingers.

From what I’ve read in the forums, many people teach children to sew using handcrank machines. If you go this route, I think the most economical route to go would be to acquire a cheap model 99 or Spartan and buy an aftermarket handcrank. Jenny at Sew-Classic sells them.

I should also mention that I’m not a skilled seamster and have no experience teaching sewing to either children or adults. If any readers have any experience in this area and can help Hans out with recommendations, please feel free to sound off in the comments.

More to come in Part 2.

More Updates Soon, and Send Me Craigslist Photos to ID!

Have you gotten any better at ID’ing Singers from Craigslist photos? I hope so, as it can really pay off. Case in point: I’m selling a 201 to an acquaintance, and she needs a table for it. I started cruising Craigslist looking for cheap sewing machine tables/cabinets to buy, and came across this one for $30 (cheap for the NYC area):

I immediately recognized it as a 206, Singer’s first zigzag. At 30 bucks I couldn’t pass it up, so I went the next day and fetched the machine. Not a bad deal; I've got a table for my buyer and scooped up a great machine in the process. 

So how could I tell it was a 206?
 

The giveaways that this was a 206

Model 206s are not easy to come by, and the ad was a week old by the time I stumbled on it. If the person had put “Singer 206” at the top of their ad, I’m sure the machine would’ve been long gone. 

If you need help ID’ing a Singer from a crappy photo, e-mail me a photo or a link to the ad, and I’ll identify it for you if I can. (I’ll post those photos and explanations here, but don't worry, I won't post the link to the ad if you're worried about competition from other buyers.) You can e-mail me at:

vintage (dot) singers (dot) nyc (at) gmail (dot) com 

Due to popular demand, I’ve been working on tutorials for how to re-wire a potted motor, like you’d find on a model 15-91 and a 201-2. Because I’m writing it up “… For Dummies” style, it is going to be long. I am aiming this tutorial at people who have zero electrical experience, so there’s quite a lot of information and tips I need to convey, and even reviews of different tools you can do the job with. Please be patient and I'll starting posting the multi-part series soon. 

In the meantime, feel free to send those Craigslist photos if you need help.